IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM - departure added to imported route

Print Page | Close Window

departure added to imported route

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=2643
Printed Date: 19 May 2024 at 2:14am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: departure added to imported route

Posted By: rpierz
Subject: departure added to imported route
Date Posted: 20 Apr 2024 at 5:12pm

I know that when building a route a departure procedure can be added to the origin during the initial route entry. What about when a route is imported from an external source like FlyQ. At this point the route just becomes another stored route. But even with a stored route, so you add a departure procedure since the origin was already created. I can't get a prompt to enter a departure in this situation.

Thanks

-------------
Rick Pierzchajlo

Replies:

Posted By: AviSteve
Date Posted: 22 Apr 2024 at 12:26pm

The IFD will allow a departure to be entered only on an origin. When you load the FlyQ plan, is the first airport in the plan identified as an origin?

-------------
Steve Lindsley
Avidyne Engineering