ADS-B services on IFD 100 via WiFi |
Post Reply |
Author | |
Melohn
Senior Member Joined: 11 Dec 2013 Location: PHNL Status: Offline Points: 139 |
Post Options
Thanks(0)
Posted: 11 May 2023 at 9:23pm |
I’m trying to use the IFD100 to talk to an IFD440 running 10.1.3.2 in my cockpit. It seems to work fine, with flight plans syncing and position properly shown.
I have turned on “WIFI ADS-B Support” in the IFD100 app settings. I have successfully joined both the IFD 440 and the iPad to the Stratus 3 WiFi network. ForeFlight displays both traffic and weather from the Stratus, so the network connectivity is fine, and the ADS-B information is present. The IFD 440, as a WiFi client of the Stratus, displays both ADS-B traffic and weather. I don’t however see either ADS-B traffic or weather on the IFD 100. Any ideas on how to debug this? I thought I’d try connecting to the IFD trainer 10.3, but it doesn’t appear to support remote ADS-B networking, just the IFD based hotspot, which makes sense since it cannot adjust the iPad’s SSID on its own. |
|
Randy
Groupie Joined: 20 Jul 2016 Location: KTUS Status: Offline Points: 74 |
Post Options
Thanks(0)
|
I know this post is over a year old, but was curious as to if you ever got an answer, or figured out how or if weather and traffic can be displayed on the ifd100...
Regards,
|
|
Regards,
Randy |
|
Melohn
Senior Member Joined: 11 Dec 2013 Location: PHNL Status: Offline Points: 139 |
Post Options
Thanks(0)
|
My primary problem in initially setting this up was the #-&%@ ForeFlight app repeatedly switching the Stratus 3 I was connected to back into “ForeFlight mode”, which causes it to no longer send ADS-B to either the IFD in the panel or the IFD 100 app. It turns out ANY ForeFlight app in the cockpit will do this, so sometimes it was my co-Pilot who innocently fired up ForeFlight, only to let it change the Stratus configuration.
It’s very disappointing that years later, ForeFlight still refuses to acknowledge this as a bug, let alone fix it. When I got my second IFD 440 installed, I was able to hardwire it to my ADS-B In source, and the problem completely disappeared.
|
|
Randy
Groupie Joined: 20 Jul 2016 Location: KTUS Status: Offline Points: 74 |
Post Options
Thanks(0)
|
Yes, I heard about the "foreflight issue". I don't use it, so I can rule that out.
(Also, I don't use "co-pilots", just on general principals...nasty little buggers...) I know hardwiring to a Ranger, or Skytrax, or MLB, whatever its called now, does away with the issue, but I don't have those either. I can get traffic and wx on the ifd440 from my stratus, but as of yet, the ifd100 will not show traffic or wx. It does allow all other items, freq transfers, fuel totals, etc... just none of the other stuff. I have been using AvareX, and it does what the ifd doesnt, so...... Thanks for your reply.
|
|
Regards,
Randy |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |