Release 10.3.1.2 |
Post Reply | Page 12> |
Author | ||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(2)
Posted: 16 Feb 2023 at 2:27pm |
|
Release 10.3.1.2 is primarily a bug fix release for
10.3.0.2. Here are the release notes:
|
||
Steve Lindsley
Avidyne Engineering |
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
Software will be available starting Monday, February 20.
|
||
Steve Lindsley
Avidyne Engineering |
||
skybum02
Groupie Joined: 11 Dec 2017 Status: Offline Points: 42 |
Post Options
Thanks(0)
|
|
Is there a link to the webinar from today?
|
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
|
||
Steve Lindsley
Avidyne Engineering |
||
SeanMollet
Newbie Joined: 05 Aug 2019 Location: OverlandPark,KS Status: Offline Points: 25 |
Post Options
Thanks(0)
|
|
Thanks for getting this done so quickly!
|
||
ricardo
Senior Member Joined: 17 Jan 2022 Location: Seattle, wa Status: Offline Points: 134 |
Post Options
Thanks(0)
|
|
yay! -- thanks avidyne!
|
||
R0bst3r
Groupie Joined: 27 Jun 2019 Location: Va Status: Offline Points: 44 |
Post Options
Thanks(0)
|
|
I agree, thanks for fixing this so quickly. Especially the Trutrak bug, I honestly expected it to never be fixed.
|
||
vas4avidyne
Groupie Joined: 21 Jun 2022 Location: SF Bay Area Status: Offline Points: 51 |
Post Options
Thanks(0)
|
|
AviSteve, we had discussed two issues related to Screen Brightness in the last few months - one where there is a "cliff" when one goes from 52 to 48% when adjusting brightness manually and the other one where the manual screen brightness in a particular profile is not saved across power cycles. I can understand that the second one may be a design choice but I think the first one is a bug - has that been resolved in 10.3.1.2?
Thanks.
|
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(1)
|
|
We fixed it by having you disable enroute VNAV. I'm not sure if you saw this, but skitheo made an interesting, related post this afternoon.
|
||
Steve Lindsley
Avidyne Engineering |
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
Both of those behaviors are per original design of the IFD and have been there since 10.0. The LCD has a day/night mode and the "cliff" was there to provide more resolution at each end of the scale. Nevertheless, we have modified the design to increase the number of brightness levels to 100 instead of 25 and make the brightness along the scale continuous, though not linear. We have also modified the design to save the last selected brightness level, but only to a specific minimum. We intentionally kept the changes in 10.3.1.2 to a small number of bug fixes. That's why the new brightness behavior was not included. They are scheduled for inclusion in the next release.
|
||
Steve Lindsley
Avidyne Engineering |
||
vas4avidyne
Groupie Joined: 21 Jun 2022 Location: SF Bay Area Status: Offline Points: 51 |
Post Options
Thanks(0)
|
|
Thanks, Steve. Guess I shouldn't be holding my breath for that next release :-)!
|
||
jredm
Newbie Joined: 18 Jan 2023 Location: XNA Status: Offline Points: 1 |
Post Options
Thanks(0)
|
|
How does this information get disseminated aside from this forum? I
randomly googled today and saw a post on a piper forum regarding the
update then came over here. I do regularly get webinar alerts from Kelly Myers and I don't think I would have glossed over something related to this update. What time of day will it be released?
|
||
skybum02
Groupie Joined: 11 Dec 2017 Status: Offline Points: 42 |
Post Options
Thanks(0)
|
|
Lighting improvement is one of my most anticipated updates. Looking forward to that in the future.
|
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
The webinar yesterday was publicized over email. As for what time of day the software release will be available, I guess I'll just say 5 o'clock. Because it's always 5 o'clock somewhere :)
Edited by AviSteve - 17 Feb 2023 at 11:09am |
||
Steve Lindsley
Avidyne Engineering |
||
TogaDriver
Senior Member Joined: 23 Sep 2013 Location: United States Status: Offline Points: 133 |
Post Options
Thanks(0)
|
|
Looks like a great list to add to your regression testing for future releases, Steve. Looking forward to the fixes.
Every product release has beta testers... we just don't know it at the time. Cheers Neil |
||
Dallas90
Groupie Joined: 19 Oct 2022 Location: Texas Status: Offline Points: 63 |
Post Options
Thanks(0)
|
|
Anything in the works to make MSG alerts customizable? The loss of the MSG alerts on my PFD was one of the factors driving me back to 10.2.
This was handled poorly and should be a user preference. Some of us think "Switch Tanks" is more important than "Class B ahead". You lost my trust with 10.3.1 and I won't be upgrading again until you have proven that you have removed bugs (without introducing more), and you've fixed the message problem.
Edited by Dallas90 - 17 Feb 2023 at 3:30pm |
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
Not at this point.
|
||
Steve Lindsley
Avidyne Engineering |
||
Gring
Senior Member Joined: 30 Dec 2011 Location: Kingston, NY Status: Offline Points: 737 |
Post Options
Thanks(0)
|
|
Did the new release include the one line of code necessary to populate BARO field on the air data computer page when connected to a G5? Tech support said it was a one line of code update and should make the next release.
|
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
LOL. I'm not sure where they came up with that, but no matter how many lines of code it is, that was not included in this release. 10.3.1.2 specifically addressed only high priority bugs from 10.3.0.2.
|
||
Steve Lindsley
Avidyne Engineering |
||
paulr
Senior Member Joined: 24 Jan 2014 Status: Offline Points: 558 |
Post Options
Thanks(0)
|
|
Are there any improvements in this release to flight plan sync with Foreflight?
|
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
No
|
||
Steve Lindsley
Avidyne Engineering |
||
vas4avidyne
Groupie Joined: 21 Jun 2022 Location: SF Bay Area Status: Offline Points: 51 |
Post Options
Thanks(0)
|
|
@AviSteve, per the webinar, 10.3.1.2 was supposed to have been released yesterday but I haven't seen any posts with download instructions for owners of Experimental planes. If the software has been posted, instructions would be appreciated! Thanks.
|
||
MikeS
Groupie Joined: 29 Jan 2021 Location: Melbourne Status: Offline Points: 73 |
Post Options
Thanks(0)
|
|
The instructions are actually IN the webinar.
|
||
Mike Salmon
Technical Marketing Manager Avidyne Corporation |
||
vas4avidyne
Groupie Joined: 21 Jun 2022 Location: SF Bay Area Status: Offline Points: 51 |
Post Options
Thanks(0)
|
|
Thanks, Mike.
For anyone else that is looking for the location, here's the Knowledge Base article that provides info about the 10.3.1.2 update and has a link at the bottom to request the actual update: https://pilotsupport.avidyne.com/kb/article/816-ifd-5xx-4xx-software-update-10-3-1-2-update-instructional-video-for-loading/
|
||
doog
Groupie Joined: 27 Nov 2017 Location: KCCR Status: Offline Points: 73 |
Post Options
Thanks(0)
|
|
Update went smoothly, so happy to be rid of the frequency bug! Looking forward to future updates.
|
||
Shawn26
Newbie Joined: 04 Dec 2020 Location: Los Angeles Status: Offline Points: 11 |
Post Options
Thanks(0)
|
|
Hello Steve. I’ve a IFD 540, G3, G3X touch and GFC 500 autopilot. I heard with this new release the VNAV works on GFC 500 autopilot for the terminal portion for the step down on the approach. Would you kindly confirm if that is correct? Thank you
|
||
ricardo
Senior Member Joined: 17 Jan 2022 Location: Seattle, wa Status: Offline Points: 134 |
Post Options
Thanks(0)
|
|
afaik VNAV with the GFC500 in the terminal area is a GTN only feature ..
the lateset release is a bug only fix anyways. |
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
I suspect it does not, but I don't have specific evidence one way or the other.
|
||
Steve Lindsley
Avidyne Engineering |
||
Gring
Senior Member Joined: 30 Dec 2011 Location: Kingston, NY Status: Offline Points: 737 |
Post Options
Thanks(0)
|
|
I can confirm that the VNAV autopilot function of the GFC500 autopilot is a GTN function only. This is due to the way the GTN communicates over a digital stream to the GFC500 autopilot (G3X, G5, GI275). It's unlikely it will ever work with an IFD.
Everything else works perfectly and is a very nice combination.
|
||
Shawn26
Newbie Joined: 04 Dec 2020 Location: Los Angeles Status: Offline Points: 11 |
Post Options
Thanks(0)
|
|
Thanks. That’s what I thought. My dealer told me otherwise which I had doubt. It would’ve been so great to see it working hopefully in future!
|
||
Gring
Senior Member Joined: 30 Dec 2011 Location: Kingston, NY Status: Offline Points: 737 |
Post Options
Thanks(0)
|
|
I updated mine over the weekend and everything went smooth. I have yet to fly the airplane to test with the G5/GFC500 autopilot combination.
One issue I have is my iPad will connect to the WiFi, but my iPhone never shows up. It connects to the WiFi, and ForeFlight has the flight plan transfer button, but it never shows up in the list of devices, and ForeFlight fails to receive a flight plan. iPad works just fine. My unit has certified TAWS, so I’m excited to see the new alerts and callouts and hopefully will fix the previous versions issue with the mid continent annunciator with the inhibit switch. That never worked properly.
|
||
vas4avidyne
Groupie Joined: 21 Jun 2022 Location: SF Bay Area Status: Offline Points: 51 |
Post Options
Thanks(0)
|
|
I too updated mine over the weekend but I had a bit of a glitch initially - when I powered on the unit with the USB key inserted, it seemed to go into Maintenance mode and it showed the list of items with 10.3.1.2 at the top and I received a message about the update but right after that, the display went blank. I waited for about 10 min and when nothing changed, I turned off the power and started again. This time I got an initial message saying the 10.3.1.2 update did not complete and then everything worked as expected (I received the prompt for external power) and the update completed successfully.
I went flying after that - it's nice to see the frequencies retained after a shutdown! Vas
|
||
Gring
Senior Member Joined: 30 Dec 2011 Location: Kingston, NY Status: Offline Points: 737 |
Post Options
Thanks(0)
|
|
I had a chance finally to fly the airplane this morning. Lots of nice features. One thing I am seeing though is the airport exclusion zone does not look correct on either of my IFDs. I'm wondering if I have a setting wrong, but I've checked it multiple times. I'd post a picture here, but there doesn't seem to be a way to upload it to the forum. Anyone else see this?
Other items are the certified TAWS, I'm not getting the excessive sink rate, even when performing an emergency descent at +4000ft/min. I am getting the aural for crossing the final approach fix, but not other waypoints. Weird Edited by Gring - 03 Mar 2023 at 10:53am |
||
dmtidler
Senior Member Joined: 12 Feb 2016 Location: USA Status: Offline Points: 617 |
Post Options
Thanks(0)
|
|
Below are two screenshots of the FLTA exclusion zones from the IFD simulators. The first screenshot is from the IFD Trainer for AviOS 10.2.x.x and the second screenshot is from the IFD Trainer for AviOS 10.3.x.x. To me, the FLTA exclusion zones look slightly different due to the change in the cross hatch pattern; otherwise, they appear to be the same size and shape. |
||
Gring
Senior Member Joined: 30 Dec 2011 Location: Kingston, NY Status: Offline Points: 737 |
Post Options
Thanks(0)
|
|
Yes, exactly. I see the same thing on mine after the 10.3.1.2 update. I think the older presentation is much, much better. The new presentation doesn't really show the boundaries very well and is distracting and hard to see the actual runway environment. Curious as to why the change.
How did you upload a picture? Edited by Gring - 03 Mar 2023 at 9:53am |
||
dmtidler
Senior Member Joined: 12 Feb 2016 Location: USA Status: Offline Points: 617 |
Post Options
Thanks(0)
|
|
I don't know what prompted the display change. I also was happy with the older presentation. As far as loading pictures go; there is an insert picture icon on the full reply editor. If you start a post in the quick reply editor, there is an icon that will open the full reply editor. Attaching pictures is a two-step process; a picture needs to be uploaded before it can be accessed to attach to a post. For ease of use, I generally email iPad snapshots to myself and then upload and attach them from my desktop. Pictures can also be uploaded via a file manager accessed through the Member Control Panel.
|
||
Gring
Senior Member Joined: 30 Dec 2011 Location: Kingston, NY Status: Offline Points: 737 |
Post Options
Thanks(0)
|
|
Aaah, I forgot about the full editor capability. Thanks. I edited my original post to include the picture I took this morning. The 10.2 version had a nice presentation. 10.3 is...rather...unusable.
Avisteve, can you comment on this new map display behavior? Edited by Gring - 03 Mar 2023 at 10:55am |
||
Gring
Senior Member Joined: 30 Dec 2011 Location: Kingston, NY Status: Offline Points: 737 |
Post Options
Thanks(0)
|
|
Another item is that if you have the VNAV set to Descent Speed (@500fpm in my case) with say 1NM from the airport at 1000ft above the runway height (default) crossing restriction, once a Visual Approach is enabled, you lose the VSR indication (see my earlier picture where VSR is blank). Not sure why that is.
|
||
pburger
Senior Member Joined: 26 Dec 2013 Location: United States Status: Offline Points: 406 |
Post Options
Thanks(0)
|
|
I brought this up last September:
I totally agree about the new, coarser, hatched areas. It makes the screen very hard to read. I hate it. The older presentation is much better- IMO. I forget if Avidyne ever gave an explanation for the change. If so, I forgot it. I’d certainly like to hear it. |
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
In order to support hi resolution terrain, we had to change the way that we processed the terrain alert layer. Processing that much data in the available time required some tradeoffs. Thus, the new texture.
|
||
Steve Lindsley
Avidyne Engineering |
||
Gring
Senior Member Joined: 30 Dec 2011 Location: Kingston, NY Status: Offline Points: 737 |
Post Options
Thanks(0)
|
|
Steve, it makes the map virtually unreadable and I feel is a large downgrade from what we had. I think you need to go back and rethink this.
|
||
b2002
Newbie Joined: 08 May 2021 Location: KPTW Status: Offline Points: 21 |
Post Options
Thanks(0)
|
|
Agree the new cross hatch pattern is not nearly as good as before. Maybe only have it on IFDs with the high res terrain option?
|
||
rwinkler
Newbie Joined: 10 Sep 2022 Location: Texas Status: Offline Points: 4 |
Post Options
Thanks(0)
|
|
My avionics shop is having difficulty in updating my IFD540 to 10.3.1.2. It reads the thumb drive, starts the download, but then gets a screen saying my unit already has a certified software load, then stops. It has happened several times. So far he has been unable to load 10.3.1.2.
|
||
AviSteve
Admin Group Joined: 12 Feb 2018 Location: Melbourne, FL Status: Offline Points: 2244 |
Post Options
Thanks(0)
|
|
Double check that you actually have 10.3.1.2 on the thumb drive. You can request the software using the link at the bottom of the pilot support 10.3.1.2 article.
If that's not the problem, have the shop contact tech support. |
||
Steve Lindsley
Avidyne Engineering |
||
rwinkler
Newbie Joined: 10 Sep 2022 Location: Texas Status: Offline Points: 4 |
Post Options
Thanks(0)
|
|
The avionics shop got in touch with technical support and was able to load 10.3.1.2. However, tech support sent a new file that resulted in a complete load of my IFD540. Good thing I backed up the settings and routes. I noticed the datablock arrangement is not saved. I went flying today and BlueTooth is not functioning. The BT symbol does not appear in the upper right corner. BT is set ON in settings. In maintenance mode I see it is paired with my BT keyboard, but does not respond to it. WiFi works just fine.
|
||
rwinkler
Newbie Joined: 10 Sep 2022 Location: Texas Status: Offline Points: 4 |
Post Options
Thanks(0)
|
|
Problem solved. This morning I went into settings and turned OFF bluetooth in the connections area. Then I turned BT back ON, and it came up. I got the BT symbol and the keypad was able to communicate with the IFD540. I guess that sometimes you need a power cycle to reset.
|
||
bobcain
Newbie Joined: 26 Aug 2010 Location: 7K8 Status: Offline Points: 37 |
Post Options
Thanks(0)
|
|
Is anyone flying the new release with Aspen panel? I have spent very little time troubleshooting so far, but it appears flight plans are not passed to the Aspen. A quick check of settings in maintenance mode didn’t reveal that anything as missing or different.
|
||
PA20Pacer
Senior Member Joined: 07 Mar 2012 Location: Illinois (LL22) Status: Offline Points: 161 |
Post Options
Thanks(0)
|
|
Hi bobcain-
I have a single tube Aspen Pro Max system, and the flight plan seems to be getting through OK after the update. Regards, Bob
|
||
Bob Siegfried, II
Brookeridge Airpark (LL22) Downers Grove, IL |
||
nrproces
Senior Member Joined: 19 Sep 2016 Location: Marion, MT Status: Offline Points: 142 |
Post Options
Thanks(0)
|
|
I have the 1500 pro system, seems normal ops to me
|
||
Sauce
|
||
bobcain
Newbie Joined: 26 Aug 2010 Location: 7K8 Status: Offline Points: 37 |
Post Options
Thanks(0)
|
|
OK, thanks guys. I'll dig in closer and figure it out. Glad to hear it generally works and likely to be some small thing on this end.
|
||
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |