Print Page | Close Window

Traffic sensor fault

Printed From: Avidyne
Category: Avidyne General
Forum Name: SkyTrax Series ADS-B Receivers & Transceivers
Forum Description: Topics on the Avidyne SkyTrax 978 MHz Receivers & Transceivers
URL: http://forums.avidyne.com/forum_posts.asp?TID=1084
Printed Date: 29 Mar 2024 at 3:47am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Traffic sensor fault
Posted By: pitchristian
Subject: Traffic sensor fault
Date Posted: 06 Jun 2016 at 5:06pm
I have an IFD540 with MLB100 and on a recent 5 hour cross country I got a "traffic sensor fault" numerous times. Each time though traffic info was always displayed and the sensor fault would only last for a few seconds. Any idea what would be causing this?



Replies:
Posted By: n7ifr
Date Posted: 06 Jun 2016 at 5:49pm
I have had similar intermittent "traffic fault sensor" messages in X'country flights with similar configuration:
  .  TAS605
  .  dual 540's
  .  MLB100

It doesn't last, so I never pursued it too much.

Tom Wolf


Posted By: flybikeski
Date Posted: 06 Jun 2016 at 7:04pm
Me too.  The traffic is clearly there on the screen so I haven't pursued it.




Posted By: Ham
Date Posted: 10 Jul 2016 at 1:59pm
I am getting these "traffic sensor fault" messages well and I have IFD540/440 combo with MBL100.   

Avidyne, when is a fix coming?    It's a distraction I don't need during critical phases of flight




Posted By: TomH
Date Posted: 11 Jul 2016 at 12:41am
Originally posted by Ham Ham wrote:

I am getting these "traffic sensor fault" messages well and I have IFD540/440 combo with MBL100.
Save

I was getting those too. Along with Datalink Errors. We RMA'd my MLB100 and I've had no problems since.


Posted By: petersk
Date Posted: 17 Jul 2016 at 4:50pm
Tom, do you have any idea what was changed in your RMA? By chance did the new one come back with newer software?  I've had this problem since installation and was planning to pin them down at Oshkosh unless there's a solution already in the wild... for instance, does the new 4.1.0 solve this?




-------------
Keith Peterson
Cardinal Flyers
Cardinal RG N177KP


Posted By: TomH
Date Posted: 17 Jul 2016 at 9:29pm
Originally posted by petersk petersk wrote:

Tom, do you have any idea what was changed in your RMA? By chance did the new one come back with newer software?  I've had this problem since installation and was planning to pin them down at Oshkosh unless there's a solution already in the wild... for instance, does the new 4.1.0 solve this?

I'm pretty certain it was a bad unit. I had both Datalink and Traffic Sensor Errors. Haven't since replacement. Both had 4.10 and were configured properly using the console software.  Interestingly, I am still getting Traffic Sensor Errors. Not the same severity as before but present nonetheless. The nit happens I always glance at ForeFlight (which is paired to a Stratus 2S) and verify there's a solid connection to multiple towers. Must be a software glitch of some kind.


Posted By: ansond
Date Posted: 02 Nov 2016 at 8:48pm
FYI... had this issue as well... my avionics installer changed the ARINC channel speed to "low" from "high" and that fixed it...

Not sure where the bug is... its either the Skytrax or the IFD... its interesting that all of the IFD ARINC channel speeds are set to low in my installation... 

Doug
N208LG


Posted By: ansond
Date Posted: 06 Nov 2016 at 2:52am
Well.. hmmm... I did just get a "traffic sensor fault" while my ARINC speeds were set to "low".... just one though.. 

I am guessing that there is something going on with the IFDs... does anyone see it with something other than an IFD and Skytrax?  (i.e. Skytrax and a 430W?)



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net