Print Page | Close Window

Dynon Serial Streams

Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=1654
Printed Date: 29 Apr 2024 at 2:52am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Dynon Serial Streams
Posted By: MikeAg03
Subject: Dynon Serial Streams
Date Posted: 15 Dec 2018 at 1:23pm
Does Avidyne have any plans to increase support with Dynon entering the certified market?  It would be nice if the IFD supported Dynon's ADS-B serial format and engine monitor formats to get fuel flow/etc into the IFD flight plan management.



Replies:
Posted By: oskrypuch
Date Posted: 15 Dec 2018 at 5:29pm
In most every promo photo of the Dynon panel, you will find an IFD. I think that that is no accident, and bodes well for good future integration.

* Orest


Posted By: paulr
Date Posted: 16 Dec 2018 at 9:34am
If I were Avidyne or Dynon, I'd be looking for every partner I could find to help fight the G* juggernaut. As Orest said, I'd bet 10gal of avgas that that's exactly what's happening.


Posted By: rpostmo
Date Posted: 16 Dec 2018 at 1:03pm
Is your understanding that ver. 10.3  will fix the MLB100 problems?
or will it need to be replaced with the Rangr, Dynon, or other.
Currently the Rangr is out of the question pricewise for a 978 only
box.  I'd have a DUAL 170 with cords on the glareshield before going
that route.
Bob


Posted By: AviSteve
Date Posted: 17 Dec 2018 at 9:37am
Originally posted by MikeAg03 MikeAg03 wrote:

Does Avidyne have any plans to increase support with Dynon entering the certified market?  It would be nice if the IFD supported Dynon's ADS-B serial format and engine monitor formats to get fuel flow/etc into the IFD flight plan management.
We have a good relationship with Dynon and plan to continue collaborating with them.


-------------
Steve Lindsley
Avidyne Engineering


Posted By: MikeAg03
Date Posted: 18 Dec 2018 at 10:03pm
On that note, if I were to add extra wiring between the skyview and the IFD440/540... would it make the most sense to just add a few extra sets of RS232 lines (vs 429)?

I think if I do that, then it will be future proof (hardware wise) to add traffic, engine info, etc as support is added.


Posted By: AviSteve
Date Posted: 19 Dec 2018 at 9:28am
No guarantees, but yes, that sounds like a reasonable plan.

-------------
Steve Lindsley
Avidyne Engineering



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net