Shadin Digiflo for IFD
Printed From: Avidyne
Category: Avidyne General
Forum Name: IFD 5 Series & IFD 4 Series Touch Screen GPS/NAV/COM
Forum Description: Topics on Avidyne's IFD 5 Series and IFD 4 Series Touch Screen GPS/NAV/COM
URL: http://forums.avidyne.com/forum_posts.asp?TID=2579
Printed Date: 16 May 2024 at 10:26am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Shadin Digiflo for IFD
Posted By: Toadpilot
Subject: Shadin Digiflo for IFD
Date Posted: 18 Sep 2023 at 8:48pm
I have a Shadin Digiflo 91052XP feeding fuel information to my IFDs. I noticed in my IFD configuration it is currently set to Single engine aircraft. When I switch the IFD to Twin, I now have a display for fuel flow and fuel consumption for each engine. I have not tested this with the aircraft running yet, but I am wondering if my IFD will show each engine fuel flow like the Shadin Digiflo does? I will not be able to test this out for another week since my airplane is awaiting a new fuel sender that I had to send in for repair, so I thought I would ask the community.
-------------
Jeff Hullinger
1964 Piper PA-30 N97VP
IFD550/IFD440/EX500/AMX240/
RDR2100/GMX345/GDL69A/
SKY497/STEC60-2/G5 AI/G5 HSI
|
Replies:
Posted By: Toadpilot
Date Posted: 19 Sep 2023 at 8:18am
I was able to confirm that my IFD 550 does display each engines fuel flow and gallons used since last reset when I enabled multi engine in the configuration setup. I powered up the avionics and turned my fuel boost pumps on to confirm the IFD registered the fuel flow. I am not sure how I missed this option previously, but it is a nice addition to my fuel management tab.
-------------
Jeff Hullinger
1964 Piper PA-30 N97VP
IFD550/IFD440/EX500/AMX240/
RDR2100/GMX345/GDL69A/
SKY497/STEC60-2/G5 AI/G5 HSI
|
|